LRA-2400
Frequently Asked Questions
|
What Lowrance units are compatible with the LRA 2400? |
HDS-5, HDS-5M, HDS-7, HDS-7M, HDS-8, HDS-8M, HDS-10, HDS-10M,
LCX-113C HD, LCX-112C, LCX-38C HD, LCX-37C, LCX-28C HD, LCX-27C,
LMS-525C DF, LMS-522C iGPS, LMS-520C, X515C DF, X510C, GlobalMap 9300C HD,
GlobalMap 9200C, GlobalMap 8300C HD, GlobalMap 8200C, GlobalMap
7300C HD, GlobalMap 7200C, GlobalMap Baja 540C, and GlobalMap Baja
840C. ( In some cases software updates may be required.) |
|
What are the fuse values? |
5 amps for dome. 3 amps for RIM-300 (for non-HDS units) |
|
Will the LRA 2400 operate with other manufacturers' units
besides Lowrance? |
The LRA-2400 will also work with the Simrad GB40, NX40, and
NX45. Northstar M84, M121, 6000i, 6100i, and 8000i. |
|
|
||
|
|
Product Information
|
|
|
|
|
Radome Diameter |
24" |
|
Power Output |
4 kW |
|
Voltage Required |
10.8 - 42 volts DC |
|
Current Draw / Power Consumption |
30W (maximum) at 12 V DC |
|
Interference Rejection |
Yes |
|
Rain Clutter (FTC) |
Yes - Off and On - Variable in manual mode |
|
Sea Clutter (STC) |
Yes - 3 modes-variable in manual mode |
|
Gain Adjustment |
Yes - up to 256 levels |
|
Range |
1/8NM - 48NM |
|
Number of Ranges |
14 |
|
Automatic/Manual Tuning |
Yes |
|
Warm Up Time |
90 seconds or less |
|
Rotation Speed |
27 RPM |
|
Display Modes (Heading, Course, and North Up) |
Yes |
|
Trail Capable |
Yes |
|
Trail Settings |
7 levels |
|
Max Radar Image Size |
80% over scan |
|
Guard Zone |
Yes - 2 can be set |
|
Radar Park Control |
Yes |
|
Display Active Beacons |
Yes |
|
Slotted Wave Guide Antenna |
No - Patch Array |
|
X Band (10GHZ) |
Yes |
|
Operational Wind Velocity (Max) |
70 Knots |
|
Beam Width in Degrees (Horizontal) |
4° |
|
Beam Width in Degrees (Vertical) |
25° |
|
Operating Temperature |
+5° to 131° F (-15°C to +55° C) |
|
Water Resistance |
IPX6 (IEC 529) |
|
Cable Length |
33 ft (10 m) Max recommended for processor box - 14 AWG |
|
Weight |
22 lb (10 kg) |
|
Manufactured |
2008 - 2011 |
LRA-2400 Wiring Information for HDS Units
LRA-2400
Wiring Information
Connecting to
LCX (Legacy) Unit with RIM 300
Back to the Top
